FLEXIBLE FIXTURE DESIGN & AUTOMATION

Abstract View PDF Download PDF

##plugins.themes.academic_pro.article.sidebar##

Published May 20, 2019
Download
PDF
Statistic

Downloads

Download data is not yet available.
Vol. 4 No. 4 (2019): IEJRD

##plugins.themes.academic_pro.article.main##

Mr. Bhawthankar A. A
Lecturer in Mechanical Department SVSMD’s K.K.I.Polytechnic,Akkalkot
Mr. Mane M. B
HOD Mechanical Engineering Department SVSMD’s K.K.I.Polytechnic,Akkalkot
Mr. Paramshetti S. C
Lecturer in Mechanical Department SVSMD’s K. K. I. Polytechnic, Akkalkot
Mr. Ghurghure K. A
Lecturer in Mechanical Department SVSMD’s K.K.I. Polytechnic, Akkalkot

Abstract

The cost of designing and fabricating fixtures can amount to 10± 20% of the total manufacturing system costs. To reduce manufacturing costs, a fixture system is designed to be competent in fixturing as many work pieces as possible. In mass volume production, this can be achieved by fixturing a large quantity of the same kind of work pieces. In low-to-medium volume production, however, improvement of the flexibility of fixture systems becomes a favorable way to reduce the unit cost of product.

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite
[1]
Mr. Bhawthankar A. A, Mr. Mane M. B, Mr. Paramshetti S. C, and Mr. Ghurghure K. A, “FLEXIBLE FIXTURE DESIGN & AUTOMATION”, IEJRD - International Multidisciplinary Journal, vol. 4, no. 4, p. 15, May 2019.

References

  1. Flexible fixture design and automation: Review, issues and future directions
  2. Z. M. BIy* and W. J. ZHANGy
  3. Introduction to Fixture Design
  4. www.worldscibooks.com/etextbook/5671/5671_chap1.pdf
  5. Google'dan alınma - 11/2011

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.