METHOD OF DETERMINATION OF STANDARD UNCERTAINTY OF MEASUREMENT MEASURING

Authors

  • Isroilov Fakhriddin Murodqosimovich Jizzax Polytechnic Institute Senior Lecturer Department of Metrology and Standardization
  • Bozorov Alisher Ganisherovich Jizzax Polytechnic Institute Assistant of the Department of Metrology and Standardization
  • Altmishev Bobur Sunnatiaevich` Jizzax Polytechnic Institute Assistant of the Department of Metrology and Standardization, Republic of Uzbekistan, Jizak city, Jizzax Polytechnic Institute

DOI:

https://doi.org/10.17605/OSF.IO/4REHS

Keywords:

Uzstandart, metrologica, label, export, standard, Oz DSt, modification.

Abstract

Extensive work in the field of measurement shows that its role in science and technology and in the life of human society is extremely high. And, of course, the development of society is determined by the status and capabilities of measurements and its metrological support. Ensuring the uniformity of measurements is one of the most pressing issues in metrology. Therefore, any measurement information obtained as a result of measurements (regardless of the conditions, time and place of the measurements) is important and useful in ensuring the unity of measurement in the required accuracy.

Downloads

Download data is not yet available.

Downloads

Published

2021-02-06

Issue

Vol. 6 No. ICDSIIL (2021): ICDSIIL-21

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

[1]
“METHOD OF DETERMINATION OF STANDARD UNCERTAINTY OF MEASUREMENT MEASURING”, IEJRD - International Multidisciplinary Journal, vol. 6, no. ICDSIIL, p. 5, Feb. 2021, doi: 10.17605/OSF.IO/4REHS.

Similar Articles

1-10 of 204

You may also start an advanced similarity search for this article.