PERFORMANCE OF A DIRECT EVAPORATIVE COOLER OPERATING IN KHANDESH REGION IN MAHARASHTRA

Authors

  • Dipak A Warke Department of Mechanical Engineering, J.T.Mahajan College of Engineering,Faizpur, India
  • Dr. Samir J Deshmukh Department of Mechanical Engineering , P.R.M.I.T.& R,Badnera, India

DOI:

https://doi.org/10.17605/OSF.IO/5ZT3H

Keywords:

Cooling capacity. Evaporative cooler, Saturation efficiency,

Abstract

The present work analyze the performance of a direct evaporative cooler in Khandesh region in Maharashtra. The experimental study is based on weather data from Khandesh region in Maharashtra. In this region in summer temperature and humidity in the range of 37 to 48 C and 40% to 70% respectively and in rainy season relative humidity reaches to more than 90%.The direct evaporative cooler consists of a aspen pads are mostly used.The performance of the evaporative cooler is evaluated using the output temperature, saturation efficiency.The output temperature of the air varies between 27.8°C and 26°C, while the cooling capacity is between 1.84 kW and 2.56 kW.

Downloads

Download data is not yet available.

Downloads

Published

2020-01-20

Issue

Vol. 5 No. 1 (2020): IEJRD

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

[1]
“PERFORMANCE OF A DIRECT EVAPORATIVE COOLER OPERATING IN KHANDESH REGION IN MAHARASHTRA”, IEJRD - International Multidisciplinary Journal, vol. 5, no. 1, p. 5, Jan. 2020, doi: 10.17605/OSF.IO/5ZT3H.

Similar Articles

61-70 of 210

You may also start an advanced similarity search for this article.