WALL DEFECTS AND THEIR ELIMINATION

Authors

  • Kasimova Saodat Tashevna Docent ofTashkent Architecture and Civil Engineering Institute
  • Mutalova Barno Irgashevna Docent ofTashkent Architecture and Civil Engineering Institute

DOI:

https://doi.org/10.17605/OSF.IO/KGSBN

Keywords:

defects in walls, cracks, deviation of walls from the vertical peeling, destruction of individual layers, corrosion, freezing, facades, settling, inspection

Abstract

The main defects of the walls: cracks, stratification of masonry, buckling and subsidence of individual sections of the walls, etc.When examining buildings, it is necessary to carefully check the walls, seams and joints of panels cracks in stone walls most often appear as a result of uneven precipitation of the walls (due to the precipitation of the foundations of the foundations).In panel and brick buildings with defects, it is necessary to seal the joints and seams

Downloads

Download data is not yet available.

References

Lednev V. I. "Organization and technology of repair and construction works in the reconstruction and overhaul of civil buildings". Tambov State Technical University Publishing House.uni. Tambov 2006.

Fizdel. I. A. Defects in structures, structures and methods of their elimination M. Stroyizdat 2001,

SHNK 2.08.01-19 Residential buildings.

http://www/stroinawka.ru/d26dr5265m3.html

Downloads

Published

2021-05-29

How to Cite

[1]
“WALL DEFECTS AND THEIR ELIMINATION”, IEJRD - International Multidisciplinary Journal, vol. 6, no. 3, p. 4, May 2021, doi: 10.17605/OSF.IO/KGSBN.

Similar Articles

1-10 of 152

You may also start an advanced similarity search for this article.