FORECAST OF FEMUR BONE SKELETON WITH ANATOMICAL PARAMETER OF INDIAN POPULATION

Authors

  • Mr. Gajanan D. Mandavgade Assistant professor, Dept. of Mechanical Engineering, Sipna College of Engineering & Technology, Amravati (M.S), India.
  • Mr. Sanjay M. Kherde Professor, Dept. of Mechanical Engineering, Sipna College of Engineering & Technology, Amravati (M.S), India.
  • Mr. Tushar R. Deshmukh Professor, Dept. of Mechanical Engineering, Prof. Ram Meghe Institute of Technology & Research, Amravati (M.S.) India.
  • Mr. Sachin S. Ingole Associate Professor, Mechanical Engineering Department, Sipna college of Engineering and Technology, Amravati (M.S), India.

DOI:

https://doi.org/10.17605/OSF.IO/TDV4Z

Keywords:

Femur bone, Modeling, Anatomical parameter, Hip implant.

Abstract

Total hip replacement (THR) is a surgical procedure that replaces a diseased hip joint with artificial bone known as implant. Due to extensive variations in the sizes and shapes of femur bone, a selected commercial hip implant sometimes may not be best-fit to a patient, or even it cannot be applied as geometric discrepancies between the femur and implant. The aim of the study is to develop mathematical approach through which geometry of femur can be obtained by using anthropometric data. From result it was explicit that the measured value and value obtained by means of mathematical model showed authentic correlation in male and female categories. The model was validated by comparing measured value with calculated value and the agreement was found qualitative as coefficient of correlation were more than 0.90 for each category.

Downloads

Download data is not yet available.

Downloads

Published

2019-11-20

Issue

Section

Articles

How to Cite

[1]
“FORECAST OF FEMUR BONE SKELETON WITH ANATOMICAL PARAMETER OF INDIAN POPULATION”, IEJRD - International Multidisciplinary Journal, vol. 4, no. 7, p. 6, Nov. 2019, doi: 10.17605/OSF.IO/TDV4Z.

Similar Articles

1-10 of 120

You may also start an advanced similarity search for this article.